Running sand making machine needs maintain to produce the best possible results. But when it stops, maintain also needs to preventing from rupture. The following are several advise referenced:
1. Keep it in dry environment. Those have to be exposed to the air should located at flat ground, padded with board and covered with fabrics.
2. Give a wide berth to each sand making machine, so that they could not affect each other.
3. Before placing the sand making machines, make sure to maintain them and repair the parts and clear up thoroughly.
4. Keep the manual control at idle throttle position and all controls at neutral position.
5. The storage of engine:
(1)Discharge the cold water from motor.
(2)Change the engine oil which would protect the metal parts of engine.
(3)Fill the fuel tank with diesel oil in case that the tank would get rusty.
(4)Run the sand making machine once a month while it is not in use. Attention should be paid to the water filled into engine. Remember to discharge it.
6. Rust prevention
(1)Have a antirust paint.
(2) Smear butter to the parts.
7. Storage of buttery
(1)Keep the sand making machine in dry and no-cold environment.
(2)Charge the lead-acid battery once a month. |
10.29
